Loading …
Loading …
Guide for TitanX
Step 1 Run the loader and enter your license key.
Step 2 (Optional) If you need to start with a completely clean system state CRITICAL: Before clicking Clean or spoofing with TPM, ensure BitLocker is disabled and you are on a Local Windows account (See Special instructions Below)! a)Restart your router to obtain a new IP address (requires dynamic IP). b)Ensure BitLocker is turned off and you are signed in to a Local Windows account. c)Click the Clean button in the loader interface to clear data from your previous session. d)Click Reload PC and wait for your computer to fully reboot.
Step 3 If any security feature fails to disable automatically after rebooting, click Guide → Configure → Reload PC.
Step 4 Launch HWID Identity Changer and wait for the driver to load completely.
Step 5 Close the application. The process is successfully completed!
Must Decrypt Disk
Method A: Windows Settings (Win 11 / 10)
Settings (Win + I) → Privacy & security (Update & Security on Win 10) → Device encryption (or BitLocker Drive Encryption) → Switch toggle to "Off" / click "Turn off".
Method B: Classic Control Panel
Press Win + R → type control and press Enter → System and Security → BitLocker Drive Encryption → Click "Turn off BitLocker" on Drive C: → Wait for 100% decryption.
Method C: Fast Terminal / PowerShell (Admin)
PowerShell Admin
manage-bde -off C:
Check status: manage-bde -status C:
Run command in Admin PowerShell. Check status until "Protection Off" and 0.0% encrypted are shown.
CRITICAL: Before clicking Clean or spoofing with TPM, ensure BitLocker is disabled and you are on a Local Windows account (see Step 1 instructions above)!
Before running the checker, completely disable any VPNs, proxy servers, or network filters. Having an active VPN during this step can lead to incorrect check results and prevent MAC address spoofing, which will result in subsequent bans! ❗️
Unlink Cloud & PIN
Win + I Accounts Your info Sign in with a local account
1 Press Win + I on your keyboard to open Windows Settings.
2 Navigate to the Accounts section on the left sidebar.
3 Click on Your info.
4 Under the "Account settings" section, click: "Sign in with a local account instead".
5 Click Next and confirm your identity by entering your current Microsoft password or PIN.
6 Choose a local username (e.g., User or your name). You can leave the password fields empty for instant login.
7 Click Next, then click "Sign out and finish".
8 Log back into Windows under your new offline local account. Your PC is now completely unlinked from Microsoft servers and safe from TPM lockouts!
Critical on Fresh Windows
If your system clock differs from the security server time by more than 15 minutes (common after a fresh Windows installation or timezone changes), the loader cannot verify encrypted security signatures [EN/01-02] and will prompt you to sync your clock.
Right-click Tray ClockAdjust date and timeSync now
1 Right-click the clock in the bottom-right corner of the taskbar (system tray) → click "Adjust date and time".
2 Toggle ON "Set time automatically" and "Set time zone automatically".
3 Under "Synchronize your clock", click the "Sync now" button.
4 Verify that a checkmark with "Last successful time synchronization" appears.
5 Done! Return to TitanX and click "Activate" — no loader restart required.